中化建國際 受招標人委托對下列產品及服務進行國際公開競爭性招標，于2024-06-05在公告。
本次招標采用電子招標方式，現邀請合格投標人參加投標。

1、招標條件
項目概況:浙江LNG三期項目接收站工程計量橇
資金到位或資金來源落實情況:已落實
項目已具備招標條件的說明:已具備
2、招標內容
招標項目編號:0704-2440JDCP6115
招標項目名稱:浙江LNG三期項目接收站工程計量橇
項目實施地點:中國浙江省
招標產品列表(主要設備):

3、投標人資格要求
投標人應具備的資格或業績:對投標人的資格和業績要求：Requirements for Qualification and reference of Bidder: （1）資格要求 Requirements for Qualification of BidderA．如果投標人為境內注冊公司，投標人需提供合法有效的企業法人營業執照、稅務登記證及組織機構代碼證或證照合一的營業執照；如果投標人為境外注冊公司，需提供有效的公司登記注冊證明。
A．The bidder within the customs territory shall provide valid independent legal person business license, tax registration certificate, organization code certificate, or combined certificate and business license;The bidder outside the customs territory shall provide valid certificate to prove valid business registration certificate.B.本次招標不接受代理商投標。
B. Bid by Agent is not accepted.C.是否接受聯合體投標：否。
C. Joint Venture: Not Accepted.D.授權要求：a.如果投標人為超聲波流量計制造商，投標人應取得成橇商全球范圍內對本項目投標的合法唯一正式授權；授權內應明確投標人在已授權成橇商的工廠內集成計量橇系統。
b.如果投標人為計量橇成橇商，投標人應取得超聲波流量計制造商全球范圍內對本項目投標的合法唯一正式授權，授權內應明確超聲波流量計在投標人的工廠內集成計量橇系統。
c.投標人以自己制造的貨物參與投標的，不能再將此貨物同時授權給其他供應商參與投標，否則相關的所有投標將被拒絕。
d.投標人將被授權的貨物再授權給其他投標人同時參與本項目投標，相關的所有投標將被拒絕。
D. Authorization requirements:a.If the bidder is a manufacturer of ultrasonic flowmeter, the bidder shall obtain the skidder's global legal sole official authorization for this bidding and shall integrate the metering system at the authorized skidder's plant in the authorization.b.If the bidder is a metering skidder, the bidder shall obtain the legal and sole official authorization globally for this bidding from the manufacturer of the ultrasonic flowmeter and shall integrate the authorized ultrasonic flowmeter into the metering system at its plant in the authorization.c.If a bidder is bidding with their own manufactured goods, they cannot authorize other suppliers to bid at the same time, otherwise all related bids will be rejected.d.The bidder will authorize the authorized goods to other bidders and bid this project, all related bids will be rejected.（2）資質要求及證明文件（2）Requirements for Qualification of bidder and certificate.①　投標人需同時提供滿足以下（一）（二）兩項要求的證明文件。
（一）投標人需提供成橇商的特種設備生產許可證（以下a、b兩項中滿足其一即可）：a.許可項目為壓力管道元件制造，子項目為元件組合裝置的中華人民共和國特種設備生產許可證；b.許可項目為壓力容器制造，子項目為固定式壓力容器其他高壓容器（A2）或大型高壓容器（A1）的中華人民共和國特種設備生產許可證。
（二）投標人需提供超聲波流量計制造商的中華人民共和國計量器具型式批準證書，型式批準產地必須與流量計產地一致。
1.The bidder must provide the following valid qualification certificates:(I) The license shall meet either of the following two items:a. The license's permit item is manufacture of pressure piping components. The license's permit sub-item is Component combination device; b. The license's permit item is pressure vessel fabrication in manufacture license of special equipment, The license's permit sub-item is fixed pressure vessel of the other high-pressure vessel(A2), or large and high pressure vessel(A1). (II) Bidder shall provide Ultrasonic Flowmeter Manufacturer's License. Ultrasonic flowmeter manufacturer needs to have PATTERN APPROVAL CERTIFICATE OF THE MEASURING INSTRUMENTS OF THE PRC. The Origin of Instruments must be same with the flowmeter's origin.（3）業績要求（3）Requirement for Bidder's reference投標人同時滿足以下三項業績情況：The bidder shall meet all of the following three conditions:業績要求（一）投標人自2009年1月1日至投標截止之日（以到貨驗收證明材料時間為準），在中國境內具有一個合同的用于天然氣計量的計量橇供貨業績，且同時滿足以下要求：1)至少有一條計量回路磅級不小于1500LB；2)至少有一條計量管路尺寸不小于12寸。
3)合同中所用流量計的計量器具型式試驗批準證書的型式注冊表的準確度不高于1.0%。
投標人須按規定格式提交業績表，并提交相關業績證明文件。
業績證明文件包括但不限于：1）銷售合同掃描件和2）到貨驗收材料。
所提交的業績證明文件必須至少體現以下內容：合同簽署頁（賣方為本次投標人）、貨物名稱、到貨驗收材料簽署時間、流量計的計量器具型式試驗批準證書的型式注冊表、超聲波流量計儀表數據表、主要技術參數（計量介質、磅級、尺寸）及到貨驗收材料（能夠證明主體貨物到貨驗收合格）。
未提交業績證明文件，或所提供的業績證明文件無法體現要求的內容的，均視為無效業績。
業績認定時間：以到貨驗收證明材料時間為準。
到貨驗收證明材料有多個簽字或蓋章時間的，以最晚簽字或蓋章時間為準。
Performance requirements (i)The bidder shall have at least one performance record of supplying natural gas trade metering system for metering trade in China from January 1, 2009 to the deadline of this Bid (subject to the time of arrival acceptance). The performance record shall meet both of the following requirements:1)The pressure is not less than 1500LB in the system;2)The size of metering pipe is not less than 12 inches in the system.3)The accuracy of the type registration form for the type test approval certificate of the measuring instrument for the flowmeter used in the contract is not higher than 1.0%.The bidder shall submit the performance list as the specified format, and submit the relevant performance proof documents. Performance proof documents include but are not limited to: 1) Scanned copy of sales contract (including relevant technical attachments) and 2) Arrival acceptance materials. The performance proof documents submitted must at least reflect the following contents: contract signing time, project name,goods name, arrival acceptance materials signing time, main technical parameters (including medium,poundage, size),the type test approval certificate of the measuring instrument and arrival acceptance documents (to demonstrate that the subject goods has arrived and has been accepted),Ultrasonic flow meter instrument data sheet. Failure to submit performance documentation, or the provided performance documentation does not reflect the required content, shall be regarded as invalid performance.Performance time: the date of acceptance certificate file shall prevail. If there are multiple signature or seal times for the arrival acceptance certificate file, the latest signature or seal time shall prevail.業績要求（二）投標人所投標的計量橇內的氣體超聲波流量計制造商自2009年1月1日至投標截止之日（以到貨驗收證明材料時間為準），在中國境內具有一個合同的用于天然氣計量設備的超聲波流量計的供貨業績，且同時滿足以下要求：1)合同中至少有一臺超聲波流量計的計量回路磅級不小于1500LB；2)合同中至少有一臺超聲波流量計的計量管路尺寸不小于12寸。
3)合同中所用流量計的計量器具型式試驗批準證書的型式注冊表的準確度不高于1.0%。
投標人須按規定格式提交業績表，并提交相關業績證明文件。
業績證明文件包括但不限于：1）銷售合同掃描件和2）到貨驗收材料。
所提交的業績證明文件必須至少體現以下內容：合同簽署頁（應有雙方蓋章）、超聲波流量計制造商名稱、貨物名稱、到貨驗收材料簽署時間、流量計的計量器具型式試驗批準證書的型式注冊表、超聲波流量計儀表數據表、主要技術參數（計量介質、磅級、尺寸）及到貨驗收材料。
未提交業績證明文件，或所提供的業績證明文件無法體現要求的內容的，均視為無效業績。
業績認定時間：以到貨驗收證明材料時間為準，到貨驗收證明材料有多個簽字或蓋章時間的，以最晚簽字或蓋章時間為準。
Performance requirements (ii)There is at least one record by The Ultrasonic flowmeter supplier who supplied ultrasonic flowmeter for natural gas metering trade in China from January 1, 2009 to the deadline of this Bid (subject to the time of arrival acceptance) at least, the record shall meet both of the following requirements:1)The pressure is not less than 1500LB in the record;2)The size of metering pipe is not less than 12 inches in the record.3)The accuracy of the type registration form for the type test approval certificate of the measuring instrument for the flowmeter used in the contract is not higher than 1.0%.The bidder shall submit the performance list as the specified format, and submit the relevant performance proof documents. Performance proof documents include but are not limited to: 1) Scanned copy of sales contract (including relevant technical attachments) and 2) Arrival acceptance materials. The performance proof documents submitted must at least reflect the following contents: contract signing time, project name, manufacturer's name of the Ultrasonic flowmeter supplier, goods name, arrival acceptance materials signing time, main technical parameters (including medium, poundage, size) ,the type test approval certificate of the measuring instrument and arrival acceptance materials (ability to demonstrate that the subject goods have arrived and passed acceptance),Ultrasonic flow meter instrument data sheet. Failure to submit performance documentation, or the performance documentation provided cannot reflect the required content, shall be regarded as invalid performance.Performance time: the date of acceptance certificate files shall prevail. If there are multiple signature or seal times for the arrival acceptance certificate files, the latest signature or seal time shall prevail.業績要求（三）投標人所投標的計量橇內的強制密封球閥的制造商自2009年1月1日至投標截止之日（以到貨驗收證明材料時間為準），在中國境內具有一個合同的用于天然氣計量設備的強制密封球閥供貨業績，且同時滿足以下要求：1)合同中至少有一臺強制密封球閥的磅級不小于1500LB；2)合同中至少有一臺強制密封球閥的執行機構驅動形式為氣動；3)合同中至少有一臺強制密封球閥的尺寸不小于12寸。
4)合同中所用流量計的計量器具型式試驗批準證書的型式注冊表的準確度不高于1.0%。
投標人須按規定格式提交業績表，并提交相關業績證明文件。
業績證明文件包括但不限于：1）銷售合同掃描件和2）到貨驗收材料。
所提交的業績證明文件必須至少體現以下內容：合同簽署頁（應有雙方蓋章）、強制密封球閥的制造商名稱、貨物名稱、主要技術參數（計量介質、磅級、尺寸，動力形式）、流量計的計量器具型式試驗批準證書的型式注冊表、超聲波流量計儀表數據表、到貨驗收材料簽署時間及到貨驗收材料。
未提交業績證明文件，或所提供的業績證明文件無法體現要求的內容的，均視為無效業績。
業績認定時間：以到貨驗收證明材料時間為準，到貨驗收證明材料有多個簽字或蓋章時間的，以最晚簽字或蓋章時間為準。
Performance requirements (iii)There is at least one record by the supplier who supplied the forced sealing ball valves for natural gas trade in China from January 1, 2009 to the deadline of the tender (subject to the time of arrival acceptance) at least, the record shall meet all of the following requirements:1)The pressure of the forced sealing ball is not less than 1500LB in the record;2)The sealing power of the ball valve is pneumatic in the record;3)The size of metering pipe is not less than 12 inches in the record.4)The accuracy of the type registration form for the type test approval certificate of the measuring instrument for the flowmeter used in the contract is not higher than 1.0%.The bidder shall submit the performance list as the specified format, and submit the relevant performance proof documents. Performance proof documents include but are not limited to: 1) Scanned copy of sales contract (including relevant technical attachments) and 2) Arrival acceptance materials. The performance proof documents submitted must at least reflect the following contents: contract signing time, project name, manufacturer's name, goods name, arrival acceptance materials signing time, main technical parameters (including medium,poundage, size) ,the type test approval certificate of the measuring instrument and arrival acceptance materials (ability to demonstrate that the subject goods have arrived and passed acceptance),Ultrasonic flow meter instrument data sheet. Failure to submit performance documentation, or the performance documentation provided cannot reflect the required content, shall be regarded as invalid performance.Performance recognition time: the date of qualified materials receipt shall prevail. If there are multiple signature or seal times for the arrival acceptance certificate materials, the latest signature or seal time shall prevail.（4）其他要求1.制造商應通過GB/T19001（ISO9001）質量體系認證證書、GB/T24001（ISO14001）環境管理體系認證證書、B/T28001(OHSAS18001)或GB/T45001 (ISO45001) 職業健康管理體系認證證書，投標人須同時提供制造商有效的GB/T19001（ISO9001）質量體系認證證書、GB/T24001（ISO14001）環境管理體系認證證書、B/T28001(OHSAS18001)或GB/T45001 (ISO45001) 職業健康管理體系認證證書。
Other requirements1.manufacturer should own GB/T19001 (ISO9001) quality system certification, GB/T24001 (ISO14001) environmental management system certification, B/T28001 (OHSAS18001) or GB/T45001 (ISO45001) occupational health management system certification.Bidders must also provide valid manufacturer’s GB/T19001 (ISO9001) quality system certification, GB/T24001 (ISO14001) environmental management system certification, B/T28001 (OHSAS18001) or GB/T45001 (ISO45001) occupational health management system certification and can be verified on the website of the China Certification and Accreditation Administration (http:// /). If there is the latest system standard issued by the relevant state departments, the latest system standard shall prevail.
是否接受聯合體投標:不接受
未領購招標文件是否可以參加投標:不可以
4、
未在中國電力招標采購網（www.dl-yggm.cn）上注冊會員的單位應先點擊注冊。登錄成功后的在 招標會員 區根據招標公告的相應說明獲取招標文件！
咨詢電話：010-51957458
手 機：18811547188
聯系人：李楊
QQ:1211306049
微信：Li18811547188
郵箱：1211306049@qq.com
來源：中國電力招標采購網
備注：欲購買招標文件的潛在投標人,注冊網站并繳納因特網技術及商務信息服務費后，查看項目業主，招標公告并下載資格預審范圍，資質要求，
招標清單，報名申請表等。為保證您能夠順利投標，具體要求及購買標書操作流程按會員區招標信息詳細內容為準。
編輯：mofcom