澄清或變更簡要說明：1.原公告中：
主要技術規格：往復式注水泵，排量60m3/h，吸入壓力41~51kPaG，排出壓力26500kPaG
現變更為：
主要技術規格：往復式注水泵，排量60m3/h，吸入壓力150kPaG，排出壓力26400kPaG
2.原招標文件附件“2.2注水泵技術文件 .rar”中的：
MD(BD)-DWG-DPPB-GE-1006 HZ25-8 DPPB GENERAL LAYOUT FOR LOWER DECK(CN-USP-SCS(E)-HZ19-6) REVB
BD-DWG-DPPA-PR-4110(01) HZ19-6 DPPA Piping & Instrument Diagram Water Injection Pumps(NO.1).REV(0)
BD-DWG-DPPA-PR-4110(02) HZ19-6 DPPA Piping & Instrument Diagram Water Injection Pumps(NO.2).REV(0)
BD-REQ-GEN-MA-1005 REQUISITION FOR WATER INJECTION PUMP SKIDS(CN-USP-SCS(E)-HZ19-6) REV(0)
BD-DDS-DPPA-MA-1009 DATA SHEET FOR WATER INJECTION PUMP SKIDS (DPPA-P-4105A&B&C&D&E)(CN-USP-SCS(E)-HZ19-6) REV(0)
現變更為（見澄清文件附件）：
BD-DWG-DPPA-GE-1006 HZ19-6 DPPA PLAN PLOT FOR LOWER DECK(CN-USP-SCS(E)-HZ19-6) REVB
BD-DWG-DPPA-PR-4111(01) HZ19-6 DPPA PIPING & INSTRUMENT DIAGRAM WATER INJECTION PUMPS NO.1 REV(0A)
BD-DWG-DPPA-PR-4111(02) HZ19-6 DPPA PIPING & INSTRUMENT DIAGRAM WATER INJECTION PUMPS NO.2 REV(0A)
BD-REQ-GEN-MA-1005 REQUISITION FOR WATER INJECTION PUMP SKIDS(CN-USP-SCS(E)-HZ19-6) REV(0A)
BD-DDS-DPPA-MA-1009 DATA SHEET FOR WATER INJECTION PUMP SKIDS (DPPA-P-4105A&B&C&D&E)(CN-USP-SCS(E)-HZ19-6) REV(0A)
3.本項目標書發售截止時間變更為：2025年4月3日。

4.本項目投標截止時間變更為：2025年4月17日上午9點整。

5.原公告中：
2014年1月1日至投標截止日（以合同簽署時間為準），投標人所投注水泵（往復式）的制造商或成撬商應具有至少2個合同的注水泵（往復式）的供貨業績，且均滿足：⑴泵設計和制造滿足API674最新版標準；⑵泵排量不小于60m3/h；⑶泵出口壓力不小于26500kPaG；⑷海水介質工況下的業績要求。
投標人提供的業績合同若非制造商直接簽訂，但合同中的注水泵（往復式）的制造商與本次所投產品中注水泵（往復式）的制造商一致，也予以認可。

現變更為(業績評審以本次發布的為準）：
2014年1月1日至投標截止日（以合同簽署時間為準），投標人所投注水泵（往復式）的制造商或成撬商應具有至少2個合同的注水泵（往復式）的供貨業績，且均滿足：⑴泵設計和制造滿足API674最新版標準；⑵泵排量不小于60m3/h；⑶泵出口壓力不小于26400kPaG；⑷海水介質工況下的業績要求。
投標人提供的業績合同若非制造商直接簽訂，但合同中的注水泵（往復式）的制造商與本次所投產品中注水泵（往復式）的制造商一致，也予以認可。

中化建國際 受招標人委托對下列產品及服務進行國際公開競爭性招標，于2025-03-27在發布變更公告。
本次招標采用傳統招標方式，現邀請合格投標人參加投標。

1、招標條件
項目概況:5套注水泵橇（往復式）安裝在HZ19-6DPPA平臺的底層甲板。

資金到位或資金來源落實情況:已落實
項目已具備招標條件的說明:已具備
2、招標內容
招標項目編號:0704-2540JDCP5594
招標項目名稱:有限深圳-惠州25-4油田綜合調整/惠州19-6油田5d井區開發項目往復式注水泵
項目實施地點:中國廣東省
招標產品列表(主要設備):

3、投標人資格要求
投標人應具備的資格或業績:對投標人的資格和業績要求：
Requirements for Qualification and reference of Bidder:

（1）資格要求
Requirements for Qualification of Bidder
A.★制造商要求:
所投注水泵（往復式）為境內產品：投標人需是注水泵（往復式）的制造商。

所投注水泵（往復式）為境外產品：允許注水泵（往復式）的制造商或取得注水泵（往復式）制造商唯一授權的成撬商或代理商投標。

一個制造商對同一品牌同一型號的注水泵（往復式），僅能委托一個成橇商或代理商參加投標。

投標人為代理商或成撬商時，應得到本次投標注水泵（往復式）制造商的唯一合法授權，并需在投標時提供以下材料（制造商代表簽字或蓋制造商代表人名章或蓋制造商公章）：
1）在有效期內注水泵（往復式）制造商唯一授權書原件 (制造商授權書中的簽名和蓋章必須是原件）。

2）注水泵（往復式）制造商提供承諾函（格式自擬），承諾投標所投產品為制造商工廠生產。

A. ★Manufacturer requirement:
Water Injection Pumps (Reciprocating) Offered from within the PRC Customs Territory: Bidders must be the manufacturer of the Water Injection Pumps (Reciprocating).
Water Injection Pumps (Reciprocating) Offered from within the PRC Customs Territory: The manufacturer of the Water Injection Pumps (Reciprocating) or the sole authorized contractor or agent of the Water Injection Pumps (Reciprocating) manufacturer is allowed to bid.
A manufacturer can only appoint one skidder or agent to participate in the bidding for the same brand and model of the Water Injection Pump (Reciprocating).
When the bidder is an agent or contractor, they shall obtain the sole legal authorization of the manufacturer of the water injection pump (reciprocating) for this bidding, and shall provide the following materials at the time of bidding (signed by the manufacturer's representative or stamped with the manufacturer's representative's name seal or official seal):
1) The original of the sole authorization letter from the manufacturer of the Water Injection Pumps (Reciprocating) within the validity period (the signature and official seal shall be original);
2) The manufacturer of the water injection pump (reciprocating) shall provide a commitment letter (in a self drafted format), promising that the products submitted for bidding will be produced by the manufacturer's factory.

B.★中國境內投標人應承諾往復泵在其品牌制造廠生產，同時承諾在供貨時提供產品原產地證明。
招標人不接受貼牌產品；
B.★The domestic BIDDER should promise the reciprocating pumps are produced in its brand own manufactory. And overseas BIDDER promise to provide certificate of origin. The Purchaser does not accept the OEM product;

C.★營業執照：如果投標人為境內注冊公司，投標人需提供合法有效的企業法人營業執照、稅務登記證及組織機構代碼證或證照合一的營業執照；
如果投標人為境外注冊公司，需提供有效的公司登記注冊證明；
C.★Business licence: The bidder within the customs territory shall provide valid independent legal person business license, tax registration certificate, organization code certificate, or combined certificate and business license;
The bidder outside the customs territory shall provide valid certificate to prove valid business registration certificate.
D.★投標人所投產品的制造商須具備有效的GB/T19001或ISO9001質量體系認證證書，國內認證機構簽發的證書應可在中國國家認證認可監督管理委員會網站( Search/CompositeSearch）核實。


The design and manufacturing of the water injection pump (reciprocating) must comply with the latest version of API674 standard, and the manufacturer of the water injection pump must provide a valid API Q1 certificate at the time of bidding, which can be found on the official website（ Search/CompositeSearch ）Verify.

（3）★業績要求Requirement for Bidder's reference:
投標人需滿足以下所有要求：
The Bidder needs to meet all below requirements:
1. 2014年1月1日至投標截止日（以合同簽署時間為準），投標人所投產品的制造商或成撬商應具有至少2個合同的注水泵(往復式)的供貨業績，且均滿足：⑴泵設計和制造滿足API674最新版標準；⑵泵排量不小于60m3/h；⑶泵出口壓力不小于26400kPaG；⑷海水介質工況。
投標人提供的業績合同若非制造商直接簽訂，但合同中的往復式注水泵的制造商與本次所投產品中往復式注水泵的制造商一致，也予以認可。

1.From January 1, 2014 to the bid deadline date (subject to the contract signing time), the manufacturer or skid manufacturer of the bidder's bid products shall have at least 2 contracts of water injection pump (reciprocating) and its supporting system supply performance, and meet the following requirements: (1) pump design and manufacturing meet the latest version of API674 standards; (2) Pump displacement is not less than 60m3/h; (3) Pump outlet pressure is not less than 26400kPaG; (4) Performance requirements under seawater medium. If the performance contract provided by the bidder is not directly signed by the manufacturer, but the manufacturer of the Water Injection Pumps (Reciprocating) in the contract is consistent with the manufacturer of the Water Injection Pumps (Reciprocating) in the invested product, it is also recognized.

2.投標人須按規定格式提交業績表，并提交相關業績證明文件。
業績證明文件包括：1）銷售合同和2）用戶簽字或蓋章的到貨驗收材料（到貨驗收單或調試驗收報告或其他可以證明合同項下貨物已經到貨驗收的有效證明材料）。
投標人所提交的業績證明文件必須至少體現以下內容：合同簽署時間、合同簽署頁（國內貿易合同應有雙方蓋章，國際貿易合同應有雙方簽字或蓋章）、制造商名稱、貨物名稱、泵設計和制造標準、泵排量、泵出口壓力、輸送介質、用戶簽字或蓋章的到貨驗收材料。

未提交業績證明文件，或通過所提供的業績證明文件無法認定滿足上述業績要求的，均視為無效業績。

2. The bidder shall submit the performance table in the prescribed format, and submit the relevant performance certification documents. Performance proof documents include: 1) Sales contract and 2) arrival acceptance materials signed or sealed by the user (arrival acceptance sheet or debugging acceptance report or other effective certification materials that can prove that the goods under the contract have arrived for acceptance). The performance documents submitted by the bidder must at least reflect the following contents: Contract signing time, contract signing page (domestic trade contracts should be sealed by both parties, international trade contracts should be signed or sealed by both parties), manufacturer name, goods name, pump design and manufacturing standards, pump displacement, pump outlet pressure, transport medium, user signature or stamped arrival acceptance materials.
Failure to submit performance documentation, or through the performance documentation provided cannot be determined to meet the above performance requirements, shall be regarded as invalid performance.
是否接受聯合體投標:不接受
未領購招標文件是否可以參加投標:不可以
4、
未在中國電力招標采購網（www.dl-yggm.cn）上注冊會員的單位應先點擊注冊。登錄成功后的在 招標會員 區根據招標公告的相應說明獲取招標文件！
咨詢電話：010-51957458
手 機：18811547188
聯系人：李楊
QQ:1211306049
微信：Li18811547188
郵箱：1211306049@qq.com
來源：中國電力招標采購網
備注：欲購買招標文件的潛在投標人,注冊網站并繳納因特網技術及商務信息服務費后，查看項目業主，招標公告并下載資格預審范圍，資質要求，
招標清單，報名申請表等。為保證您能夠順利投標，具體要求及購買標書操作流程按會員區招標信息詳細內容為準。
編輯：mofcom